Search systems in the Cobra GX 8000

Long-range search systems (sensor systems)

It contains two subsystems, namely:

Single Search System (Single Person System)

 Dual search system (two-person system)

In addition, the Free Mode system is available in both methods to manually adjust the search frequency, where the user can specify the value assigned to the specific metal type.

1 – Long Range Search System – Single Person System

You can choose it by pressing the single icon. This search mode is intended for use by one person only by using a pair of copper handles on which copper antennas are installed in the front and the handles are held by both the left and right hands. Each handle at the end contains a port that connects to a connecting unit through spiral cables. The unit is at the end with a short cable with a sensor unit that contains a small screen to display various information (search program, soil, depth and distance, as will be explained later)

As this unit continues to receive data from the ground frequency generator unit (planted in the ground at the start of work), which is connected to the main unit of the device via a cable that contains at the end of two black and red pieces connected to the sockets attached to the same color located on the front of the main unit.

This system is useful when searching in large open areas and when the prospector and the researcher have no idea about the location of a potential target, this system is used by the prospector to narrow the search for buried targets to the smallest possible area.

The device can be used here to search for ancient burials and golden treasures within a large area of ​​land within a radius of 2000 meters and can reach deep depths of up to 40 meters underground for burials buried hundreds of years ago and of relatively large size, for example a golden metal coffin or treasure chest full of coins Aureus.

In this system, many values ​​and settings can be set before starting the search, and they are as follows:

Metal (Research Program)

The user can choose here the appropriate search program for the metal that he wants to search for, as the device adjusts the settings to receive signals of this type of metal. You can choose from 12 programs for various types of precious and non-precious metals, and even diamond and gemstones.

The following search programs are available in the device:

Gold

Raw Gold

Gold veins

Silver

Bronze

Copper

Diamond

Precious stones

Platinum

Iron

Cavities

Free mode

 Soil type

With this setting, the user can choose the soil type from the available options to get more accurate results

Stony soil – Rocky soil – Sandy soil – Natural neutral soil – Moist soil – High mineralized soil – Low mineralized soil

Distance (front scan field)

Here the user can adjust the distance of the front scan field by specifying the search range within the range from 0 to 2000 meters, where he can increase or decrease the value through the left and right arrow buttons in the control panel.

Depth

Here the user can also set the maximum depth that the device can search, which contains values ​​ranging from 0 to 40 meters, and the user can also increase or decrease the value by means of the left and right arrow buttons in the control panel.

After selecting all the previous settings, the search can be started by pressing the start button, then the device will display on the screen a visual representation of all the selected settings at the top with an animation representing the search method in the lower part.

2 – The long-range search system – the two opposing person system:

This search mode is intended for use by two people at the same time through the use of a set of copper handles that have two bars at the end of each person, where one of the two people holds the handles that have ports at the end to connect with the link unit that is connected via a cable with the sensor unit and the other two handles do not contain ports The two sides of the skewers are held opposite each other by the second person.

After selecting the dual system (the two-person system) from the LRS submenu, the different settings are determined in the same way as the steps that were explained in the previous paragraphs.