Device Characteristics

Mega G3 device search systems:

Long range sensing system:

The importance of the sensor system is to save time and effort, because the long-range sensor system directs you to the nearest point around you that contains the metal that you have chosen on the device, and then sizes the target in a range not exceeding a square meter, which facilitates the search process easily and quickly, shortening time. The long-range sensor system is an ideal choice for prospectors and treasure hunters who are searching in open places and wide distances, as the device’s range on the surface of the earth reaches 2000 meters, and the depth reaches 40 meters. And in the sensor system, you can easily isolate completely the metals that you do not want to search for, for example, if you choose the golden treasures program, the device will automatically isolate the rest of the programs except for the golden treasures. To use the sensor system, the device is installed in the following form  :

 The antennas are connected to the main unit of the device. On the device, the desired target is selected from the screen, the Mega Scan Pro device in the sensor system contains ten programs, namely: the buried gold detection program The gold ore detection program The silver detection program Copper detection program Caves and spaces detection program Diamond detection program Gemstone detection program Detection program Bronze

After selecting the target, the program download screen will appear, then the search screen, and the name of the program chosen will appear with the table of distances and depths. You can switch between distances and depths via an upper and lower button. The precise frequency setting can be changed by pressing the lower button until a different tone is heard and the value is changed via a button right and left, the user can increase or decrease the frequency of the frequency to 12 Hz, the rate of increase 1 Hz for each pressure would prefer to leave the exact frequency adjustment Almsenai value of zero device features a system to determine the depths to be searched in advance with ease before working on the device in addition to the identification feature of the goal The front range by choosing the search distance to be detected with precision according to the existing area and to be explored, whether it is mountainous, plain, valleys or lands inside specific buildings. Target control with a square- shaped determination method.

This is a method that enables the user to better and accurately locate the target and verify the correctness of the target. The square around the target can be completed at a distance of 200 cm from the target center when the user is in the same line with the target and the antennas turn to the target. If the real target is, the antennas must be turned into The target from all four sides is a very important note when using the device to search for the following targets:  Diamonds, gem stones and platinum The Deep Master unit must be planted in the ground and operated in any nearby random place so that the targets are searched properly and more effectively. Measure the depth of the target.

At the highest point of the target, insert the probes and wedges from the Deep Master unit, about 8 cm in the ground. Set the precise frequency to five. Select the target program from the main unit. Wait three to four minutes. Stand on the target and watch the antennas turn to one side and this is the first signal point,  after moving from the target point, you will notice that the antennas will gradually turn forward. Stop when the antennas are turned again on one side and this is the second signal point. With several depth measurements from different points of the second signal to more accurately measure the depth, the digital voltmeter on the deep master shows the voltage or voltages from the battery 

Ionic scanning system:

It is the system that the researcher uses to discover new areas, and this system generally searches for all the minerals buried in the ground and gives a loud sound and vibrations in the event that any new targets are discovered. Using the ionic system We install the sensors in the device and tighten the rings for fixation, we choose the ionic system from the system selection menu, and a screen will appear for us with ionic scanning oscillations, the ion scanning system is used to detect ionic fields that result from long buried minerals underground, all minerals It has ionic fields of its own, and this effect increases with the increase in the duration of this mineral’s presence under the ground, and as the mineral acquires more electronics from the surrounding environment, and these effects differ according to the mineral and the different ground factors in this region.

The ionic system is based on the scientific foundations of the properties of the mineral, its chemical composition and the rank of the mineral in the periodic table of minerals, the ionic scanning system enables the user to capture a signal for these ionic fields from long distances, and it enables the user to be alerted in the event of approaching them Calibrate and use the ion scanner when the device is turned on Please choose the system Ionic from the system selection screen When the system starts, please reset the system first by long pressing the Reset Ionic Scanner button.

After completing the calibration of the device, start by moving from the right and the left and a few times from the top and bottom lightly while walking the device, when the device detects a target, it will issue a sound alert synchronized with the appearance of vibrations in the search screen and the stronger the signal, each Mazda acoustic alert and the greater the vibrations on Search screen, the ionic system can be used to search from different positions or areas high or low on the surface of the earth, and this system is never affected by the speed of walking the device.

The target indicator The targets are indicated by the signal lines to the top. If the signal is weak, this means either that the target is small or far from the surface of the earth and if the signal is strong, this means that the target is close to the surface of the earth or it is deep but its size is large. Note that you must always make sure of Target accuracy After a signal appears on the screen, you must reset the device outside the target location by long pressing the button on the far right on the control panel, and if the signal is repeated, this means that the target is 100% real

Device design

The Mega G3 device was designed to suit all researchers and prospectors, as it is equipped with a handle that allows ease of movement during the search and also the presence of the distinctive color screen (LCD) that allows users to easily control the device and choose the appropriate search system for them without trouble.

Search systems

An accurate professional system that has no parallel in the world with this technology, the famous German factories of Mega Locators.

The advanced MEGA G3 system with a long-range scanning and explortion system through high-precision electronic sensors and advanced sensors manufactured for the first time, in addition to providing the electronic unit in the device with 8 filters made of pure gold to identify gold from the farthest distances and confirm it 100% without any error resulting from Mineral rocks or highly mineralized lands such as highly mineralized basaltic lands.
%A%A
These filters work to determine the accuracy of the signal, filter it and confirm its presence from distances starting with 250 meters and up to 2000 meters for the front range, and up to depths of 40 meters in the ground with an accurate determination of the target size and signal strength existing through the integrated analytical program

High definition LCD 

When the device is turned on, the high-resolution color screen will show you all the options from choosing the language and selecting the search system, and then determining the type of target to be detected, and with a distinctive control panel

Determine the center of the target and determine the extent and determine the depth:

The device is characterized by the system of determining the depths to be searched in advance with ease before working on the device, in addition to the feature of identifying the target from the front range by choosing the search distance to be detected with precision according to the existing area and to be explored, whether it is mountainous, plain, rivers or lands inside Specific buildings.

As shown in the following table: