Device Characteristics

Search Modes:

The device includes four different search modes, which are:

1 – Ground Scan mode

The ground scan mode is used to make a vacuum survey by using the standard probe for the area in which metal targets are likely to be present.

Geospatial data are stored for later analysis using the software installed on the included tablet or laptop computer.

2 – Mineral Scan mode

This mode is used to search for various natural minerals or their compositions in the ground, such as silver or copper metals.

3 – Magnetometer Scan

As is evident, this search mode enables the user to search for metals that have a magnetic property, such as iron, steel, and others.

When using this mode, the device displays an approximate representation on the screen of the changes in the captured signal, although the mode is mainly audio mode.

Both probes can be used to scan in this mode, but when using the super sensor, a greater search depth can be obtained.

4 – Pin Pointer

As the name of this mode suggests, it allows the possibility of locating potential targets more precisely, and gives the ability to distinguish between magnetic and non-magnetic meanings, and the super sensor must be used exclusively when using this mode.

Analyzing data with Visualizer 3D  

The measured data for the surveying process recorded by the measuring sensors in two operating modes (ground scan and mineral scanning) can be transferred to a computer, laptop or tablet on which the analytical program attached to this device is installed.

Which provides enormous possibilities for conducting a detailed graphical analysis of the search area and can know the locations, sizes and depths of all the targets buried within the survey area.

The data within the Visualizer 3D analysis program is displayed in a three-dimensional graphical form in different colors.

The different colors express the nature of the metal or the material, where each color expresses a certain type, for example the red color for a precious metal target and the blue for the color of the space.

Through the program’s easy interface, it is possible to know the depth and position of any target accurately and visually.

Where you can find out all the details about all the targets and spaces within the scanned search area.

– touch screen

The Rover C4 is provided with a large LCD screen that supports touch to give easy and intuitive control over the various device settings.

Such as choosing the scan modes and other options through a visual interface with a simplified menu system.

Languages

Arabic – English – French – Spanish – Farsi – German